DuroStar DS5000X User Manual page 21

5.
Install wheels
a. Place the wheels onto either side of the axle.
6.
Install outside wheel washers
a. Place the other large washers onto each side of the
axle in front of the wheel.
7.
Install cotter pins
a. Place a cotter pin through the hole on each end of
the axle and bend it out to secure the wheels.
8.
Install handles
a. Attach the handles to the brackets on the frame
using the provided bolts and nuts.
b. Flip the assembled generator over onto its wheels
and support brackets.
Do not over tighten the handles, it will prevent free
movement.*
21