Mounting The Tv To A Wall; Front / Right Side View And Controls - JVC LT-65C898 Instruction Manual

Mounting the TV to a Wall

Use the instructions in your Quick Start Guide if you are wall mounting your TV
straight out of the box. If you have already attached the stand then follow the
instructions below.
Remove the stand assembly before mounting the TV onto the wall.
1. Remove the 8 screws from the stand.
2. This TV is designed to be wall-mounted with a
standard 400 mm x 400 mm mounting kit (sold
separately) designed for flat-panel TVs. Mount
this TV according to the instructions included in
the mounting kit. Due to space restrictions, we
recommend that you make all connections before
mounting on to
the wall.
• If you are wall mounting your TV you may wish to buy a 90° HDMI adapter. This will help with your cable management.
• Please read this instruction manual carefully while setting up your TV.
• If you require additional assistance please call our Call Centre on (UK) 0344 561 1234 or (Ireland) 1 890 818 575.
Our Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.

Front / Right Side View and Controls

USB 3.0
1
USB
ARC
Item
1 MULTI FUNCTION SWITCH
2 POWER LED
3 IR (Infrared Receiver)
JVC 65' LED Smart 4K HDR TV LT-65C898 Manual.indd 9
400mm
Four mounting holes
400mm
(size M6 screw)
10-13mm
M6
2
Description
Switches the TV into standby and on. Selects modes (channel,volume, and source).
Illuminates when the TV is in standby mode. The LED will blink confirming that a timer
recording programme has started in the standby mode.
Receives IR signals from the remote control.
Do not put anything near the sensor, as its function may be affected.
Preparation
(A)x4
(B)x4
3
2
9
18/02/2019 10:03