JVC LT-65C898 Instruction Manual page 22

Customising TV Settings
4
3. Highlight PICTURE then press the OK button.
• Press the
Mode
Contrast
Brightness
Sharpness
Colour
Energy Saving
Backlight
Advanced
Picture Settings
Dolby Vision
Notifications
4. Press the BACK button to return to the previous menu.
5. Press the EXIT button to exit the menu.
22
JVC 65' LED Smart 4K HDR TV LT-65C898 Manual.indd 22
buttons to adjust the levels in the menus.
Your TV has some pre-set picture modes: Dynamic - Natural - Cinema - Game. The default setting
is Standard. You can also manually adjust each mode.
Adjusts the difference between light and dark levels in the picture.
Increases or decreases the picture brightness.
Adjusts the level of crispness in the edges between light and dark areas of the picture.
Controls the colour intensity.
The energy saving mode can be adjusted from Custom - OFF - Minimum - Medium - Maximum
- Auto - Screen Off. Adjusting this setting will reduce the brightness and power consumption of
your TV or turn the screen off altogether.
Adjusts the backlight setting. Only available when Custom Energy Saving is selected above.
Select to have more advanced adjustments to your TVs picture.
Dynamic Adjusts the contrast to pre-set levels.
Contrast
OFF - LOW - MEDIUM -HIGH
Noise
Reduces the noise level of the
Reduction connected device: Off / Low / Middle
/ High.
Colour Adjusts the colour temperature.
Temp
NORMAL - WARM - COOL
Picture
Adjusts the aspect ration of the
Zoom picture. AUTO - 16:9 - SUBTITLE - 14:9
- 14:9 Zoom - 4:3 - CINEMA.
Film Mode Film mode can be switched to AUTO
or OFF. Auto mode will adjust the
frame rate to produce the clearest
motion.
Skin Tone Adjusts the skin tone from -5 to 5.
Colour Select to adjust the picture colour
Shift
between Red and Green.
You can switch Dolby Vision Notifications on or off. When the notification is on, if you press the
Info button it will show if you are watching HDR content.
18/02/2019 10:03