Table of Contents
Advertisement
Registration and deregistration
Add and register handsets
If registration fails, the system will automatically try to register
again. If registration fails after the third try, Registration failed
appears on the handset screen. The handset shows To register
HS... and ...see manual alternately, and the telephone base returns
to idle mode. This may take up to five minutes to occur. Please
start again from Step 1.
Notes:
You cannot register a handset if any other system handset is in use.
f
If you try to register more than five handsets to the telephone base, the telephone base shows
f
Registration slots are full and sounds two beeps.
If it is the first time you install your AT&T
DLP73290/DLP73390/DLP73490/DLP73590
telephone system, or power returns following
a power outage, the handset and the
telephone base will prompt you to set the
date and time when registration is successful.
After that, the telephone base will prompt if
you want to set up Smart call blocker* and the
answering system via voice guides. Press
/SELECT on the handset to start. For
MENU
details, see the corresponding sections in the
telephone system's user's manual. To skip
these settings, press
handset.
* Includes licenced Qaltel
Qaltel
is a trademark of Truecall Group Limited.
TM
/CANCEL on the
OFF
technology.
TM
14
Date: MM/DD/YY
ECO
Time: HH:MM - -
ECO
Voice guide set
Smart Call Blk?
Voice guide to
set up Ans sys?
Advertisement
Table of Contents
