Installing An Rru Power Cable - Huawei DBS3900 LTE Installation Manual

RRU3260
Installation Guide
Open the clip only for the associated cable.
Figure 9-20 Opening clips
Step 4 Remove the waterproof block.
----End

9.10 Installing an RRU Power Cable

This section describes the procedure for installing an RRU power cable.
Prerequisites
l
l
Context
There are four types of RRU power cables in terms of cross-sectional areas: 3.3 mm
2
) (12 AWG) and 5.3 mm
4 mm
Issue ()
NOTE
NOTE
Remove only the waterproof blocks for the cables to be installed.
An easy power receptacle (pressfit type) connector is added to the RRU power cable on
the RRU side. For details, see
Type) to the RRU Power Cable on the RRU
Add a connector or OT terminals to the RRU power cable on the power device side. For
details, see the DBS3900 Installation Guide.
2
2 2
(0.006 in. ) and 6 mm
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12.1 Adding a Tool-Less Female Connector (Pressfit
2
(0.0082 in. ) (10 AWG) complying with North American standards,
2 2
(0.0093 in. ) complying with European standards.
9 Installing RRU Cables
Side.
2
(0.005 in.
112