Settings - Whirlpool FRR12451 User Manual

12
. RESET A RUNNING PROGRAMME, IF
NEEDED
• Press on the display the icon near the name
of the cycle until it ask to confirm "Proceed
or back" to cancelled the programme.
The water drains, the programme ends and
the door unlocks.

SETTINGS

The Tools button gives access to many other
settings, utility cycles, preferences, and information.
Touch the TOOLS button to access the Tools screen,
which contains the following (you will need to scroll
down with your finger to access all of the
selections).
6th Sense Precision Dose Dispenser 1
Press this icon to access:
6th Sense Precision Dose Status Dispenser 1 and
choose between:
• Active
• Disabled (1 Cycle)
• Off (Permanently)
Detergent Concentration Dispenser 1 and choose
between:
• 10 ml
• 15 ml
• 20-35 ml
• 40-70 ml
• 70-170 ml
6th Sense Precision Dose Dispenser 2
Press this icon to access:
6th Sense Precision Dose Status Dispenser 2 and
choose between:
• Active
• Disabled (1 Cycle)
• Off (Permanently)
6th Sense Precision Dose Content Dispenser 2 and
choose between:
• Softener
• Detergent
13
. SWITCH OFF THE WASHING MACHINE
AFTER PROGRAMME END
• The display indicates that the cycle has ended, you
can take out your laundry
• Press "On/Off to switch off the washing machine.
If you do not switch it off the washing machine
will switch off automatically after about five
minute after programme end, to save energy.
• Leave the door ajar, so that the inside of the
washing machine can dry.
Once set at Detergent:
Set Concentration Dispenser 2 and choose between:
• 10 ml
• 15 ml
• 20-35 ml
• 40-70 ml
• 70-170 ml
Control Lock
Press this icon to lock the controls. Swipe up to
unlock.
Mute
Press this icon to mute or unmute sounds.
Utility Cycles
Press this icon to access the following utility cycles:
Spin, Drain, Rinse & Spin. Touch the utility cycle you
wish to use and follow the screen prompts.
Preferences
Press to access Times and Dates, Sound Volume,
Display Settings, and Regional. Follow the screen
prompts.
WiFi
Press to access Connect to Network, SAID Codes,
Mac Address, and WiFi. Follow the screen prompts.
Info
Press to access Service & Support, Store Demo
Mode, Restore Factory, WiFi Terms and Conditions,
and Software Terms and Conditions. Follow the
screen prompts.
WARNING: Do not activate store DEMO MODE.
If you see a warning that refers to DEMO MODE
go into TOOLS, INFO and make sure that STORE
DEMO MODE is OFF.
EN
11