Haier HW80-B14959U1 User Manual page 30

11-Installation
11-4
11-6
Note: Keep in safe place
Keep all parts of the transport protection in a safe place for later use. Whenever the ap-
11.4 Moving the appliance
If the machine is to be moved to a distant location, replace the transportation bolts removed
before installation to prevent damage: The assembly takes place in reverse order.
11-8
3 0
11-5
11.3 Dismantle the transportation bolts
The transportation bolts are designed for clamping
anti-vibration components inside the appliance during
transportation to prevent inner damage.
1.
Remove all 4 bolts on the rear side and take out
plastic spacers (Fig. 11-4)(Fig. 11-5).
11-7
2. Fill left holes with blanking plugs (Fig. 11-6)(Fig. 11-7).
11.5 Aligning the appliance
Adjust all feet (Fig. 11-8) to achieve a complete level
position. This will minimize vibrations and thus noise
during use. It will also reduce wear and tear. We recom-
mend to use a spirit level for adjustment. Floor should
be as stable and flat as possible.
1. Loose the locknut (1) by using a wrench.
2. Adjust the high by turning the foot (2).
3. Tighten lock ut (1) against the housing.
EN