13• Accessories - Etesia MBHE2 Original User Manual

• REAR WHEELS
- Stop the engine and remove the contactor key.
- Apply the parking brake.
- Secure the vehicle using chocks.
- Remove the wheel hub.
- Unscrew the 3 screws with a key 6 (thread 5). Remove sidewards
the two securing rings (see picture 39).
- Place a jack under the rear part of the chassis on the side where the
wheel needs to be replaced and lift until this wheel does not touch
the ground anymore (see picture 40).
- Secure the machine by lying it on stable props. You can now re-
move the wheel from the shaft.
• For remounting, follow the same instructions in the opposite way. Do
grease the wheel shaft.
WARNING !
• Check the screw tightness.
Stop the engine, disconnect the spark plug before proceeding and remove
key from ignition.
• MU80N: MULCHING KIT
cut grass, helping its decomposition without needing any collection.
• MD80N: SIDE DEFLECTOR
• Allows ejection of the grass to the side. It is recommended in very
• ANTI-PUNCHURE TYRE LIQUID
• Introduced as prevention in the tyres inner tubes, this liquid repairs
instantaneously potential perforation.
• SEAT ARMRESTS MAC FOR MKHP
• Armrest greatly improve driving comfort, in particulary when your
mower is being used on a slope. They are easy to attach to the seat
back rests by 4 screws.
• SPREADER MET
(see picture 44)
• Having a hopper capacity of 60 L, this wheel-driven distributing disc
spreader is ideal for spreading snow clearing salt or sand.
• MR80: TOWING HOOK FOR MKHE, MBHE, MHHE
AND MKHP
(see picture 45)
• Allows to tow light loads according to following limits:
- 140 kg on the trailer axle (trailer + load)
- 20 kg upward or downward on the drawbar
- drive on slopes of 5° (8.7%) maximum
12• TROUBLESHOOTING
13• ACCESSORIES
(see picture 41)
(see picture 42)
(part number 28461)
(see picture 43)
• Check the tyre pressure.
Front pressure: 1.5 bar for MKHP models
1.2 bar for other models
Rear pressure: 0.8 bar
DISPOSAL OF USED PNEUMATICS
It is forbidden to leave standing, to lay down or to burn pneumatics in
nature. Our dealer network has been informed about its obligation to
take back, free of charge, all used pneumatics from ETESIA ride on
mowers.
• SNOW BLADE MV80N3
• Designed for cleaning snow from aisles and outside areas. Adjustable
to the right or to the left.
• MOSS REMOVER MM103
• Makes it possible to extract the moss from your lawn and collect it
directly with your mower.
• CONTROL LEVER ML80
• It allows the control of the accessory mounted on your mower.
• HOMOLOGATION KIT OMX80
• It allows you to equip your mower with front and rear lighting allo-
wing it to travel on public roads.
• ANTI SCALP KIT MAS80
• The MAS80 reduces blade contact with the ground and allows the
deck to follow the contours of the ground during the cutting.
• BLADE
(see picture 51)
• MZ80 : standard blade
• MZ80P : pro blade
• MZ80EX : export blade
• MZ80M : mulching blade
ELECTRIC GRASSBOX EMPTYING KIT MVE80
• For a greater comfort of use, you can replace the lever for manual
emptying of the grassbox, using a device with an electric ram operated
by a switch mounted on the instrument panel.
All these accessories are accompanied with an instruction manual of
installation and use.
(see picture 46)
(see picture 47)
(see pictures 46, 47 and 48)
(see picture 49)
(see picture 50)
33