Setup - EuroLite NSF-250 User Manual

5

SETUP

1
Remove all packing materials from the shipping box. Make sure that there are no packing remnants at
the fog output nozzle.
2
Unscrew the tank cap and fill the tank with fog fluid. Tightly close the tank again.
The fluid tank needs to be filled with fog fluid before starting operation and always disconnected from
the mains as fluid could be spilled.
Only use quality fog fluids available at your dealer. We recommend high-quality EUROLITE fog fluids.
You must not use substances that are classified as "dangerous working material" or "inflammable
fluids".
3
Connect the device to the mains with the power plug.
4
Install the device in a well-ventilated area.
• The operation in an insufficiently ventilated room can lead to a condensation of the smoke fluid. The
resulting slippery surface can cause accidents. Keep a minimum distance of 20 cm around and above
the device.
• Furthermore do not orientate the escape nozzle directly in the direction of the audience's eyes. In order
to create a good effect, there should be a distance between the device and the audience of at least 1.5
m.
• Only install the machine on scratch resistant and water resistant surfaces.
• Please make sure that the inclination angle does not exceed 15°.
• This device is constructed for standing installation only.
www.eurolite.de
18