Page 1
Connect a 12 V power source and GPS antenna to the VBOX LapTimer. Place the GPS antenna in the middle of the vehicles roof. When satellites have been acquired, the VBOX LapTimer will check the GPS location against Racelogic’s track map database and load the layouts available. https://en.racelogic.support//Product_Info/Lap_Timing_and_Pit_Timing/VBOX_LapTimer/Quick_Start_Guide/VBOX_Laptimer_- _Quick_Start...
Page 2
The two front LEDs will indicate if the vehicles speed is currently faster (green) or slower (red) in comparison to reference lap speed. If a faster lap time is achieved, this will automatically replace the reference lap, so VBOX LapTimer is always comparing to the best time. https://en.racelogic.support//Product_Info/Lap_Timing_and_Pit_Timing/VBOX_LapTimer/Quick_Start_Guide/VBOX_Laptimer_- _Quick_Start...
Need help?
Do you have a question about the VBOX Laptimer and is the answer not in the manual?
Questions and answers