Preparation - Yuwell YU100 Product Usage

Installation and use
III. PREPARATIONS
Plug in the power cord
* Make sure that the power switch of the oxygen generator is off and then
connect the power plug to a safe grounding socket with power output.
No use of extended power cord
Press the power switch to "│", when the front of the machine
""""light, at the same time show tired, oxygen concentration and flow gear,
indicating that the machine function is normal, oxygen machine into normal
operation. After a few seconds, the indicator lights out when tired. Oxygen
machine work, every few seconds to make a "chuckle-" sound, is the normal
sound of air exchange.
IV. Oxygen inhalation operations
Press "or" on the front of the machine to the required flow rate,
where the machine front shows the corresponding oxygen concentration.
Connect one end of the oxygen tube to the outlet, the other end (oxygen
head or suction head end) with the user, you can start oxygen inhalation.
V. Shutdown
During use, if you need to temporarily stop oxygen inhalation, you can press
the "key" on the front of the machine to stop and start oxygen supply.
After use, unplug the oxygen pipe or connection pipe from the outlet, turn
off the power switch, then unplug the power plug and cut off the power
supply.
8
and use
VI. Remote control operations
Remote control can operate the machine remotely, its keystroke function is
consistent with the key function of oxygen generator.
Note: remote control operation, in front of the remote control receiving window.
VII. Symbols and meanings of safety requirements in this machine
Symb Meanin
ol g
AC
Type II
equipmen
Turn on (total
power supply)
Up
upwa
rd
Fragile
items
Flow
plus
＋
Flow
plus
Installation
Symb Meanin
ol g
Note: Access to
random documents
Disconnect
(total power
supply)
Fear
of
rain
Prohibitio
n of
fireworks
Stan
dby
Flow
reductio
－
n
Flow
reductio
n
9