CyberPower OL6000RT3UTAA User Manual page 12

CONNECTION #2 : POWER MODULE WITH MULTIPLE BATTERY MODULES
Step 1: Connect the 1 Battery module to the Power module
st
using the instructions above.
Step 2: Turn off the DC breaker of the 2
Step 3: Loosen the two screws to remove the battery cable
retention bracket of the 1
Step 4: Use the output cable of the 2
connect the 2 nd Battery module to the 1
module.
Step 5: Rotate the battery cable retention bracket and tighten
the two screws to fix battery cable.
Step 6: Use a power cord to plug AC input inlet of the 2
module into AC output outlet of the 1
Step 7: Turn on the DC breaker of the 2
BASIC OPERATION
Battery module.
nd
battery module.
st
Battery module to
nd
st Battery
battery
nd
Battery module.
st
Battery module.
nd
11
Copyright © 2011 CyberPower Systems, Inc.