Table of Contents
Advertisement
nSETUP
DATE/TIME SETTING
Set the date and time. Press
Set the date in "Month/Day/Year" order.
Set the time on a 12-hour basis. (Factory default)
DATE/TIME FORMAT
Sets the date/time display format.
DATE ..................MM/DD/YYYY, DD/MM/YYYY, YYYY/MM/DD
(YYYY: Year, MM: Month, DD: Day)
TIME ...................Select 12- or 24-hour time.
SCHEDULE (See page 35.)
You can turn the power on/off and change the screen brightness at a specified time.
LANGUAGE
Sets the display language for the menu screen.
INPUT SELECT
HDMI
Select the input mode to be used in PC/AV HDMI input terminal.
D-SUB
Select the input mode to be used in PC/AV D-Sub input terminal. Select SET after selecting the input mode, and then press
ENTER
.
HDMI AUTO VIEW
When ON is selected, the screen size is adjusted automatically according to the screen size control signal included in the
video signal input from the AV HDMI input terminal.
HOT PLUG CONTROL
Sets whether to use hot plug control for the DVI-I and PC/AV HDMI input terminals.
EDID SELECT (DVI-I)
Normally, leave this setting as AUTO.
If the display is not shown properly, change the setting according to the connected device.
AUDIO SELECT
Selects the terminal used to input audio signals in each input mode.
AUDIO OUTPUT
Sets the volume of sound output from the audio output terminals.
VARIABLE .......... You can adjust the volume using VOLUME.
FIXED .................Fixes the sounds.
or
to select the date and time, and press
Menu Items
or
to change the numerical values.
29
E
Advertisement
Table of Contents
