Kenwood KW-V230BT Instruction Manual page 71

REFERENCES REFERENCES
❏ Discs
Recordable/Rewritable discs cannot be played
back.
• Insert a finalized disc.
• Finalize the discs with the component which you
used for recording.
Tracks on the Recordable/Rewritable discs
cannot be skipped.
• Insert a finalized disc.
• Finalize the discs with the component which you
used for recording.
Playback does not start.
• The format of files is not supported by the unit.
No picture appears on the external monitor.
• Connect the video cord correctly.
• Select the correct input on the external monitor.
MPEG1/MPEG2/MP3/WMA/WAV/AAC discs
cannot be played back.
• Record the tracks using a compatible application
on the appropriate discs. (Page 66)
• Add appropriate extension codes to the file
names.
Tracks on the Recordable/Rewritable discs are
not played back as you have intended them to
play.
• Playback order may differ from the one played
back using other players.
❏ USB
"Reading" does not disappear from the screen.
• Turn the power off and on again.
While playing a track, sound is sometimes
interrupted.
• The tracks are not properly copied into the USB
device. Copy the tracks again, and try again.
Tracks are not played back as you have intended
them to play.
• Playback order may differ from the one played
back using other players.
❏ Android
Sound cannot be heard during playback.
• Reconnect the Android device.
• When <Android Setup> is set to [AUDIO MODE],
launch any media player application on the
Android device and start playback.
Sound output only from the Android device.
• When <Android Setup> is set to [AUDIO MODE],
relaunch the current media player application or
use another media player application.
• Restart the Android device.
• If this does not solve the problem, the connected
Android device is unable to route the audio signal
to unit.
Cannot playback when <Android Setup> is set to
[AUTO MODE].
• Make sure JVC Music Play APP is installed on the
Android device.
• Reconnect the Android device and select the
appropriate control mode.
• If this does not solve the problem, the connected
Android device does not support the Auto Mode.
"NO DEVICE" or "READING" keeps flashing.
• Switch off the developer options on the Android
device.
• Reconnect the Android device.
• If this does not solve the problem, the connected
Android device does not support the Auto Mode.
ENGLISH 71