Programming The Washing Time - Beko DFN05320B User Manual

AquaIntense Function
in the right side of the lower basket. It will
give better results to place the most soiled
dish to the right front side.
Do not try to remove the AquaIntense
impeller!
AquaActive Function
(Depends on model)
This function operates the lower impeller
with a higher pressure and higher speed to
enable a better washing for dishes such as
pans and trays with stubborn, dried soiling.
Tablet detergent function
(depends on model)
Allows to obtain a better drying
performance from the multi-purpose
detergents called as all in one detergents
such as 2in1, 3in1, 4in1, 5in1 and etc.,
depending on the hardness level of the tap
water.
If you have used the Tablet features
during the last washing programme
you used, Tablet function will remain
active in the next washing programme
you will select.
Tablet Detergent function may cause
change in the programme duration.
Super Rinse Function
(Depends on model)
Depending on the type of the detergent
used, if a detergent dissolving issue is
encountered it will remove the resulting
stains from the dishes and enables the
optimum rinsing performance.
32/EN
(depends on model)
AquaIntense impeller
located under the
lower impeller helps
washing your heavily
soiled dishes placed
TrayWash Function
(depends on the model)
Select Intensive 70°C programme and
press function key to run this function.
Floor illumination
Warning to show that machine is in
washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
Floor illumination is activated
automatically when the washing
programme starts and remains lit until
the end of the programme.
Floor illumination cannot be cancelled
by the user.

Programming the washing time

Time Delay
(Depends on model)
You can use the time delay key to delay
the start of the selected programme up to 9
hours. Press Start/Pause/Cancel key after
setting the Delayed Start. Once the delay
time is over, the selected programme will
start automatically.
Lights of 3-6-9 hours lamps will flash each
time you press the time delay key. When
you press the Start/Pause/Cancel key while
the selected time delay light is flashing,
the time delay light will become on and a
countdown will start. When the delay time
is over, the time delay light will go off and
the selected washing programme will start.
If you press the Time Delay key while
the 9-hour delay light is flashing, the
delay lights will go off. If you press the
Start/Pause/Cancel key while the Delay
Keys are off, the selected programme
will start without any delay.