Page 1
PERSONA Installation Hospital-Grade LCD Operating Digital Television Receiver Instructions MODEL PDI-P10LCD-C Communication Systems, Inc 40 Greenwood Lane Springboro, Ohio 45066 PH: 937-743-6010 FX: 937-743-5664 ® Better Solutions Are Within Reach http://www.pdiarm.com DOCUMENT NUMBER PD196-120R1...
PDI-P10LCD-C USER MANUAL Document Number PD196-120R1 Graphical Symbols This lightning flash with arrowhead symbol, within an equilateral is intended to alert the user of the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
TRADEMARKS All brand names and product names used in this manual are trademarks, registered trademarks, or trade names of their respective holder. PDI and Better Solutions Are Within Reach are registered trademarks of PDI Communication Systems, Inc., Springboro, Ohio. Regulatory Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
PDI-P10LCD-C USER MANUAL Document Number PD196-120R1 Installation Precautions 1. Any changes or modifications in construction of this television, which are not expressly approved by the party responsible for compliance, could void the user’s authority to operate the equipment. 2. Use only a power source from a CSA Certified / UL Approved Class 2 Power Supply suitable for use in a Health Care Facility.
Time Zone……………………………………………………………………………… 16 Power On ARC………………………………………………………………………… 16 Language……………………………………………………………………………….. 17 Picture…………………………………………………………………………………… 17 FAQ – Frequently Asked Questions…………………………………………………. 18 APPENDIX A – Installation on Other PDI-508C Arms………………………………19 Model PDI-P10LCD-C Limited Warranty……………………………………………. 21 PDI Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066...
PDI-P10LCD-C USER MANUAL Document Number PD196-120R1 About the PERSONA 10 This television is specifically designed for entertainment purposes and for use in a hospital, a nursing home, a medical-care center, or a similar health-care center in which installation is limited to a non-hazardous area in accordance with the National Electrical Code, ANSI/NFPA 70.
These instructions detail installing the PDI-P10LCD-C TV onto the PDI-508C-7 suspension arm. This arm is configured specifically for this television. The PDI- P10LCD-C TV may be installed on other PDI-508C arms. Please refer to Appendix A of this document for detailed instructions for this case.
Page 8
PDI-P10LCD-C USER MANUAL Document Number PD196-120R1 INSTALLING THE PDI-P10LCD-C TO THE PDI-508C-7 SUSPENSION ARM 1. Remove and save the ¾” Socket Head Cap Screw from the plastic “H” clip. Remove the plastic “H” clip and discard. 2. Remove the two nose cover retainer bolts. Raise the metal nose cover and slide the television completely into the arm’s clevis (slot).
PDI-P10LCD-C USER MANUAL Document Number PD196-120R1 Control Panel DIRECT ENTRY KEYPAD POWER The easy to clean membrane control panel located on the lower front of the TV contains 9 large easy to read buttons and a numbered “direct entry” keypad for both channel and cursor control.
Remove the earphone to enable the internal TV speaker. The TV only offers mono sound. Use of a stereo earphone will result in sound from only one earphone speaker. Contact PDI for either earphone or mono style headsets. PD108-112 Headset...
PDI-P10LCD-C USER MANUAL Document Number PD196-120R1 Service Levels (Tiers) The PERSONA 10 contains four separate service levels (tiers) allowing the hospital to offer either basic or enhanced viewing. The current service level can be quickly determined by accessing the SETUP MODE menu using the handheld programming remote To use this television control.
PDI-P10LCD-C USER MANUAL Document Number PD196-120R1 Channel Setup 1. AUTOPROGRAMMING Channel Setup Press the “SETUP” button on the remote control. A “SETUP MODE” screen will appear. Signal: CATV Autoprogram 2. Using the “CH▲” or “CH▼” buttons on the remote and select...
PDI-P10LCD-C USER MANUAL Document Number PD196-120R1 Enable/Disable Digital Channel 1. Press the “SETUP” button on the remote control. A “SETUP Channel Setup MODE” screen will appear. Signal: CATV 2. Using the “CH▲” or “CH▼” buttons on the remote and select Autoprogram “Channel Setup”.
PDI-P10LCD-C USER MANUAL Document Number PD196-120R1 Copy Service Level 1. Press the “SETUP” button on the remote control. A “SETUP Channel Setup MODE” screen will appear. Signal: CATV 2. Using the “CH▲” or “CH▼” buttons on the remote and select Autoprogram “Channel Setup”.
PDI-P10LCD-C USER MANUAL Document Number PD196-120R1 Volume Limiter 1. Press the “SETUP” button on the remote control. A “SETUP SETUP MODE MODE” screen will appear. Service Level : Premium 2. Using the “CH▲” or “CH▼” buttons on the remote and select Picture “Features”.
PDI-P10LCD-C USER MANUAL Document Number PD196-120R1 Time Zone 1. Press the “SETUP” button on the remote control. A “SETUP MODE” screen will appear. SETUP MODE Service Level : Free 2. Using the “CH▲” or “CH▼” buttons on the remote and select Picture “Features”.
PDI-P10LCD-C USER MANUAL Document Number PD196-120R1 Language 1. Press the “SETUP” button on the remote control. A “SETUP SETUP MODE MODE” screen will appear. Service Level : Free 2. Using the “CH▲” or “CH▼” buttons on the remote and select Picture “Language”.
PDI-P10LCD-C USER MANUAL Document Number PD196-120R1 FAQ – Frequently Asked Questions Q. Our hospital offers maternity and other educational services to select areas of the hospital. How do I program for these channels only? A. The PERSONA 10 offers three distinct service levels: Free, Basic, and Premium.
The suspension arm must be adjusted to the proper weight of the television in order to operate correctly. PDI arm model “PDI-508C-7” is factory adjusted for the proper weight. If this television is installed on a previously existing suspension arm, adjustment of the internal springs may be required.
Page 20
PDI-P10LCD-C USER MANUAL Document Number PD196-120R1 Appendix A - Continued Elbow Cover FRONT SPRING REAR FRONT SPRINGS SPRINGS REAR BRAKE TENSION BRAKE SPRING SCREWS TENSION SCREWS DO NOT ADJUST ADJUST Brake Tension Screw Detail Arm Adjustment Illustration PDI Communication Systems, Inc.
(10) days after defect is first observed. Repair of said product requires it to be shipped to the PDI factory in Springboro, Ohio. All shipments shall be F.O.B. Springboro, Ohio, and all shipping and freight charges to PDI’s factory shall be paid by the customer.