Installing Interior Assembly - U-tec Ultraloq U-Bolt Pro Z-Wave Installation And User Manual

5. Installing Interior Assembly

Step 1
Remove the battery cover of the Interior Assembly.
Step 2
Insert the connector of the cable to the socket on Interior
Assembly. When you plug the connector, please make
sure the white teeth faces up. Press the connector in
firmly until it is completed seated.
Step 3
vertical
Rotate the knob and keep it in a position to stay
unlocked.
Unlocked
Step 4
Attach Interior Assembly to Mounting Plate and tighten 2 Screws E.
- 7 -