Table of Contents
Advertisement
• If the printer was not able to print a received fax, the printer stores the unprinted fax in its memory
(Substitute Reception).
Memory Reception
When TEL priority mode is selected:
• When the call is a fax:
The telephone will ring when a call incomes.
Pick up the handset. If you hear the fax tone, wait for at least 5 seconds after it stops, then hang up
the handset.
The printer will receive the fax.
Note
• If the printer will not switch to fax reception, press the FAX button, then the Color or Black
button to receive the fax.
• To receive a fax without picking up the handset, set Manual/auto switch of the advanced
setting to ON. RX start time allows you to specify the number of seconds until the printer
switches to fax reception.
• If you have subscribed to Duplex Ringing service in Hong Kong, the telephone will ring a
specified number of times when there is an incoming call with a fax distinctive ring pattern.
Then, the printer will switch to fax reception automatically without the handset being picked up.
The number of times to ring the telephone until switching to fax reception can be changed.
• Set the printer to enable you to initiate fax reception from a connected telephone (remote
reception).
Remote Reception
• When the answering machine is connected to the printer:
• If the answering machine is set to the answering mode, set User-friendly RX of the
advanced setting to ON. If the call is a fax, the printer will receive the fax automatically.
423
Advertisement
Table of Contents
