Table of Contents
Advertisement
Setting Date and Time
This section describes the procedure to set the date and time.
1.
Check that printer is turned on.
2. Press the Setup button.
The Setup menu screen is displayed.
3. Select Device settings, then press the OK button.
4. Select Other dev. settings, then press the OK button.
5. Select Date/time setting, then press the OK button.
6. Set the date and time.
Use the
button to move the cursor under the desired position, then use the Numeric buttons to
enter the date and time.
Enter the time in 24-hour format.
Enter only the last two digits of the year.
7. Press the OK button.
8. Press the FAX button to return to the Fax standby screen.
Setting Daylight Saving Time (Summer Time)
Some countries adopt the daylight saving time (summer time) system that shifts the clock time forward at
certain periods of the year.
You can set your printer to automatically change the time by registering the date and time that daylight
saving time (summer time) begins and ends.
Important
• Not all the latest information of all countries or regions is applied for DST setting by default. You
need to change the default setting according to the latest information of your country or region.
Note
• This setting may not be available depending on the country or region of purchase.
1.
Check that printer is turned on.
366
Advertisement
Table of Contents
