Table of Contents
Advertisement
Use the
rings when incoming.
• Advanced setting in DRPD
You can specify the following setting items.
◦ DRPD: FAX ring pat.
Sets the distinctive ring pattern of a call that the printer assumes is a fax call.
If you subscribe to a DRPD service, set the ring pattern to match the pattern assigned by your
telephone company.
Setting the DRPD Ring Pattern (US and Canada only)
◦ Incoming ring
You can specify the number of times the external device rings when incoming.
• Advanced setting in Network switch
You can specify the following setting item.
◦ Incoming ring
You can specify the number of times the external device rings when incoming.
Setting the DRPD Ring Pattern (US and Canada only)
If you have subscribed to a Distinctive Ring Pattern Detection (DRPD) service provided by your telephone
company, your telephone company will assign two or more telephone numbers with distinctive ring
patterns to your single telephone line, allowing you to have different numbers for fax calls and voice calls
using only one telephone line. Your printer will automatically monitor the ring pattern, and will
automatically receive the fax if the ring pattern is a fax call.
To use DRPD, follow the procedure below to set the fax ring pattern that matches the pattern assigned by
your telephone company.
Note
• Contact your local telephone company for detailed information on this service.
1.
Check that printer is turned on.
2. Press the FAX button.
The Fax standby screen is displayed.
3. Press the Menu/Wireless connect button.
The FAX menu screen is displayed.
4. Select Receive mode set., then press the OK button.
5. Select DRPD, then press the OK button.
button or the Numeric buttons to specify the number of times the external device
363
Advertisement
Table of Contents
