Do you have a question about the BC50BS and is the answer not in the manual?
Questions and answers
Stacy Marson
May 28, 2025
The clamp icon is flashing and that's it.whats wrong with it ?
2 comments:
Mr. Anderson
May 28, 2025
A flashing clamp icon on the Stanley BC50BS indicates a fault with the battery.
This answer is automatically generated
Stacy Marson
May 28, 2025
@Mr. Anderson It doesn't have a fault symbol on the LCD display.
Anthony King
February 22, 2025
bc50bs charger/maintainer when hooked up it, the screen no readings just a blank screen that pulsates on and off ?
2 comments:
Mr. Anderson
February 22, 2025
A blank screen that pulsates on and off on a Stanley BC50BS charger/maintainer could indicate that the unit is not receiving a stable power supply. Possible causes include a loose or faulty power connection, an issue with the AC outlet, or an internal fault in the charger. Checking the power cord, ensuring the outlet is functional, and trying a different outlet may help diagnose the issue.
This answer is automatically generated
A King
February 23, 2025
@Mr. Anderson I checked at other outlet and also checked with my Electrical Meter (no problems there) so must be in BC50BS
George
April 19, 2025
how do you switch it to 15 amp rapid charge?
1 comments:
Mr. Anderson
May 10, 2025
To switch the Stanley BC50BS to 15 amp rapid charge, connect the charger to the battery and power source. The charger automatically uses the 15 Amp charge rate when charging, as it senses the battery's voltage level and applies the correct charge. No manual switch is needed to activate the 15 Amp mode.
This answer is automatically generated
Michael Ray Coltrane
May 10, 2025
Can you charge the battery while it is still in the car?
2 comments:
Michael Ray Coltrane
May 10, 2025
@Michael Ray Coltrane
Mr. Anderson
May 20, 2025
Yes, you can charge the battery with the Stanley BC50BS while it is still installed in the vehicle. However, you should ensure all vehicle accessories are off and follow safety precautions to avoid sparks or damage to onboard computerized systems.
Page 1
BC50BS Esta garantía le otorga al comprador usuario final, derechos legales específicos y usted puede tener otros derechos que varían de estado a estado o de provincia a provincia. Por favor completar la tarjeta de registro del producto dentro de un plazo de 30 días a partir de la fecha de compra y remitir a: Baccus Global LLC, One City Centre, 1 North Federal Highway, Suite 200, Boca Raton, FL 33432.
Page 2
FEATURES LCD DISPLAY DETAIL DETALLE DE LA PANTALLA LCD CARACTERÍSTICAS FEATURES CARACTERÍSTICAS 1. Battery Charge Button 1. Botón de carga de batería 2. LCD Screen 2. Pantalla LCD 3. Engine Start Button 3. Botón de arranque del motor 4. Alternator Check Button 4.
Page 3
• Ensure that all installation, operating instructions and safety precautions are • Use of accessories and attachments: the use of any accessory or attachment not Congratulations on purchasing your Stanley® battery charger. Read this Instruction • The unit was designed for household use only.
Page 4
Checking the Battery Voltage TROUBLESHOOTING 3. When the unit is properly connected, press the battery charge button on the control panel. 2. If the unit detects that the alternator is good, the LCD screen will display the following: The LCD screen will display the following: Unit Not Charging TO CHECK THE BATTERY VOLTAGE IN STANDBY MODE 1.
Page 5
Una batería marina (de bote) se debe retirar y cargar en tierra. Cargarla a bordo exige equipos Felicitaciones por adquirir su Stanley® cargador de batería Stanley®. Lea el manual de • Desenchufe el cargador de batería cuando no se está utilizando.
Page 6
correspondientes en los postes de la batería después de los pasos contorneados en el 4. Cuando la batería está completamente cargada, la unidad pasa automáticamente al modo de 3. Si la unidad detecta que el alternador está fuera de rango típico de voltaje, la pantalla LCD Al desconectar el cargador, desconecte el cable de la CA, quite la abrazadera de chasis del “instrucciones importantes sobre seguridad“...
Need help?
Do you have a question about the BC50BS and is the answer not in the manual?
Questions and answers
The clamp icon is flashing and that's it.whats wrong with it ?
A flashing clamp icon on the Stanley BC50BS indicates a fault with the battery.
This answer is automatically generated
@Mr. Anderson It doesn't have a fault symbol on the LCD display.
bc50bs charger/maintainer when hooked up it, the screen no readings just a blank screen that pulsates on and off ?
A blank screen that pulsates on and off on a Stanley BC50BS charger/maintainer could indicate that the unit is not receiving a stable power supply. Possible causes include a loose or faulty power connection, an issue with the AC outlet, or an internal fault in the charger. Checking the power cord, ensuring the outlet is functional, and trying a different outlet may help diagnose the issue.
This answer is automatically generated
@Mr. Anderson I checked at other outlet and also checked with my Electrical Meter (no problems there) so must be in BC50BS
how do you switch it to 15 amp rapid charge?
To switch the Stanley BC50BS to 15 amp rapid charge, connect the charger to the battery and power source. The charger automatically uses the 15 Amp charge rate when charging, as it senses the battery's voltage level and applies the correct charge. No manual switch is needed to activate the 15 Amp mode.
This answer is automatically generated
Can you charge the battery while it is still in the car?
@Michael Ray Coltrane
Yes, you can charge the battery with the Stanley BC50BS while it is still installed in the vehicle. However, you should ensure all vehicle accessories are off and follow safety precautions to avoid sparks or damage to onboard computerized systems.
This answer is automatically generated