Cleaning And Maintenance - UFESA CG7214 Instruction Manual

The appliance has an automatic auto off
(power save) function, which switches it
off after a period of about 40 minutes.
Drip-stop valve
A cup of coffee can be served before the brew cycle
has finished. Whenever the jug is removed from the hot
plate, the drip feed will stop temporarily. Place the jug
back on the hot plate within 20 seconds, B5.
Cleaning & maintenance
Make sure that the coffee maker is unplugged and
cold before attempting to clean it. After daily use wash
the moving parts with soapy water and wipe down the
outside of the coffee maker with a damp cloth. Do not
use abrasive cleaners or metal scouring pads.
Moving parts: filter holder, filter and jug. The swivel filter
can be removed for cleaning purposes, B6.
Descaling
Descale your coffee maker whenever you begin
to notice excessive steaming or the brewing time
increases. It is advisable to descale it every two months.
● Place the empty jug on the hot plate.
● Dilute three cups of vinegar in seven cups of water
and fill the tank with the mixture.
● Switch the coffee maker on for one minute. Switch it
off and let it stand for half an hour.
● Switch the coffee maker back on and let all the vinegar
flow through. Throw this away and clean out the jug.
● To flush out any traces of vinegar, run the coffee
maker through two more cycles but using only water.
Disposal
Dispose of packaging in an environmentally-friendly
manner. Our goods come in optimised packaging.
This basically consists in using non-contaminating
materials which should be handed over to the local
waste disposal service as secondary raw materials.
This appliance is labelled in accordance with
European Directive 2012/19/EU concerning
used electrical and electronic appliances
(waste electrical and electronic equipment
– WEEE). The guideline determines the framework for
the return and recycling of used appliances as applicable
throughout the EU. Please ask your specialist retailer
about current disposal facilities.
The manufacturer does not accept any liability for any damages
resulting from unintended use or inappropriate handling.
The manufacturer reserves his right to modify the product any
time in order to adjust it to the law, standards, directives, or due
to construction, trade, aesthetic or other reasons, without prior
notice.