Advertisement
6
model no. 040-1191-2
Insert the quick-release pin (E) into the indicated holes
4
of the main rack post (A) and hitch (B). Secure the
quick-release pin using the pin clip (F).
Note: This bike carrier can be fitted to vehicles
equipped with a 1 1/4" (3.2 cm) or 2" (5 cm) hitch
receiver.
• Follow steps 5 and 6 for fitting the bike carrier
to a
2" (5 cm) hitch receiver.
• Follow steps 7 to 9
for fitting the bike carrier to
a
1-1/4" (3.2 cm) hitch receiver.
STINGER INSTALLATION FOR 2" (5 CM) HITCH RECEIVER
Insert the 2" (5 cm) hitch adaptor (1) of the stinger
5
into the 2" (5 cm) hitch receiver (2).
Insert the anti-wobble hitch pin (J) into the aligned
6
pin holes of the 2" (5 cm)
hitch adaptor
and hitch
receiver. Secure the bolt using
flat washer (G),
spring washer (H) and pin
clip
(F).
A
A
B
F
E
2
1
J
G
H
F
STINGER INSTALLATION FOR 1 1/4" (3.2 CM) HITCH RECEIVER
Disassemble the 2" (5 cm) hitch adaptor (1) of the
7
stinger (B) by removing the two #3 cross-head
screws (3).
Insert the stinger (B) into the
1 1/4" (3.2 cm)
hitch
8
receiver (2) of the vehicle.
9
Secure the stinger using anti-wobble hitch
pin (J),
flat washer (G), spring washer (H) and pin
clip
(F).
3
1
3
B
2
B
F
H
G
J
7
Advertisement
