Advertisement
4
model no. 040-1191-2
PACKAGING CONTENTS
PART NUMBER
DESCRIPTION
Rack mast with cradle plates
A
and 2 knobs
*
Stinger
with attached
B
2" (5 cm) hitch adaptor and
rack mast adaptor
Protective bolt cap,
C
3/4" (19 mm)
Bolt: 3 1/4" (8.3 cm) L, 3/4"
D
(19 mm)
Quick-release pin :
E
2 1/2" (6.4 cm)
F
Pin clip
G
Flat washer : 1/2" (13 mm)
H
Spring washer : 1/2" (13 mm)
I
Nylon lock nut : 3/4" (19 mm)
Anti-wobble hitch pin :
J
3 1/4" (8.3 cm) L, 3/4" (19 mm)
*
The stinger can be fitted to 1 1/4" (3.2 cm) or 2" (5 cm) hitch receivers on vehicles.
QUANTITY
ILLUSTRATION
1
1
4
2
1
2
3
3
2
1
TOOLS REQUIRED FOR ASSEMBLY
•
3/4" (19 mm) ratcheting socket.
•
3/4" (19 mm) wrench.
•
Cross-head #3 screwdriver.
ASSEMBLING THE BIKE CARRIER
Align the holes at the lower end of
the rack
1
mast (A) with corresponding holes of the
stinger
(B).
Insert bolt (D) into the indicated hole and secure
2
using a flat washer (G), a spring washer (H) and a
nut (I). Tighten them using a 3/4" (19 mm)
wrench (not included).
Note: Use protective bolt caps (C) to cover the
bolt head and
nut.
Follow step 2 to insert the second bolt (D) into the
3
other indicated hole.
Note: Use protective bolt caps (C) to cover the
bolt head and
nut.
A
B
C
H
C
I
G
D
I
G
C
H
D
5
Advertisement
