Page 1
040-1191-2 HITCH MOUNT MAST BIKE CARRIER INSTRUCTION NOTE: Please read instructions carefully before installation. MANUAL Please refer to assembly instructions, and ensure the bike carrier is installed correctly. Please keep the instruction manual in your vehicle for future reference.
040-1191-2 READ AND FOLLOW THE SAFETY INSTRUCTIONS BEFORE USING THE BIKE CARRIER. CLEANING IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFE AND PROPER USE OF THIS PRODUCT. • Wipe the bike carrier with a damp cloth and mild detergent after every use and before storage.
040-1191-2 PACKAGING CONTENTS TOOLS REQUIRED FOR ASSEMBLY • 3/4" (19 mm) ratcheting socket. • 3/4" (19 mm) wrench. PART NUMBER DESCRIPTION QUANTITY ILLUSTRATION • Cross-head #3 screwdriver. Rack mast with cradle plates ASSEMBLING THE BIKE CARRIER and 2 knobs...
Page 4
040-1191-2 STINGER INSTALLATION FOR 1 1/4" (3.2 CM) HITCH RECEIVER Insert the quick-release pin (E) into the indicated holes of the main rack post (A) and hitch (B). Secure the Disassemble the 2" (5 cm) hitch adaptor (1) of the quick-release pin using the pin clip (F).
Page 5
040-1191-2 TILTING THE BIKE CARRIER LOADING BICYCLES ON THE BIKE CARRIER Separate the upper cradle plates (5) from the lower To access the rear trunk or hatch of the vehicle: cradle plates (6) by rotating the hand knobs (4) Remove all bicycles from the bike carrier.
Page 6
040-1191-2 WARNING: After loading the bicycles, do not attempt to remove the quick-release pin from the rack mast. Doing so will tilt the bike carrier and may damage the vehicle, bike carrier, or surrounding items. Danger CAUTION: Secure the bicycle pedal in such a way to prevent the vehicle from being •...