How To Initialize The Dvd Recorder & Vcr - Emerson EWR20V5 Service Manual

HOW TO INITIALIZE THE DVD RECORDER & VCR
To put the program back at the factory-default, initialize the DVD recorder & VCR as the following procedure.
< DVD Recorder Section >
1. Turn the DVD recorder on.
2. Confirm that no disc is loaded or that the disc tray
is open. To put the DVD recorder into the Version
display mode, press [DVD], [CM SKIP], [1], [2],
and [3] buttons on the remote control in the order.
Fig. a appears on the screen.
*1: " ******* " differ depending on the models.
*2: Firmware Version differ depending on the
models, and indication is one example.
F/W VERSION
Model Name : *******
Firmware Version
BE : R2F3000S1E
FE : R20_040_000
API : 2005/8/31
TT : T20163FSU@2
DEFAULT SETTING : ENTER
EXIT : RETURN
Fig. a Version Display Mode Screen
3. Press [ENTER] button, then the DVD recorder
starts initializing. When the initializing is
completed, the DVD recorder exits the Version
display mode and turns off the power
automatically.
* To move into the Normal mode from the
Version display mode, press [RETURN] button
on the remote control instead of [ENTER]
button.
* When [POWER] button is pressed before
[ENTER] button is pressed, the DVD recorder
exits the Version display mode, then the power
turns off.
1-8-1 E9601INT