Fujitsu ARYG14LHTBP Design & Technical Manual page 76

6. Touch the "Setting" on the "Function Setting" screen.
7. Setting screen of "Setting No." is displayed. Set the setting number by touching ▲ or ▼. (The
setting range is from 00 to 99.) When the "OK" is touched, the "Function Setting" verification
screen is displayed.
8. When the "Back" on the "Function Setting" screen is touched, the display returns to the "Main-
tenance" screen.
9. After completing the function setting, be sure to turn off the power and turn it on again.
CAUTION
!
After turning off the power, wait 30 seconds or more before turning on the power again. The
function setting will not become active unless the power is turned off then on again.
Function Setting
Address
Function No.
Setting No.
Back
Example: When configuring the setting number of filter sign.
Function Setting
Address
Function No.
Setting No.
00
Cancel
Function Setting
Address
Function No.
Setting No.
Back
- 70 -
[002–01]
[11]
[00]
Setting
[002–01]
[11]
OK
[002–01]
[11]
[00]
Setting