Daikin RK09NMVJU Service Manual page 13

Si001554EA
Step
4 Remove the 2 screws
and open the conduit
mounting plate cover to
the left, then remove it.
5 Remove the 7 screws
on the terminal board
and disconnect the
connecting wire and the
power supply wire.
6 Remove the 3 screws
of the right side panel.
Removal Procedure
Procedure
Hook
Conduit
mounting
plate cover
Connecting wire
The conduit mounting plate
cover has a hook on the left
and a projection on top. Be
sure to catch them all when
reassembling.
Projection
(R21632)
Terminal
board
Power supply
wire
(R21633)
Right side
panel
(R21634)
Thermistor ASSY
Points
11