Advertisement
Model:PN-8830
8.0 Maintenance
8.1 Routine Maintenance
Change Filter Elements (Minimally every 6 months)
Caution: Perform Element changes only when system is depressurized.
1. Unscrew/detach the filter housing from the filter head and drain off any oil in the
housing into a suitable container.
2. Remove and discard the used element. Replace the element with a new one of the
appropriate grade.
3. Screw/reattach the filter housing back onto the filter head. Do not over tighten.
Housing is sealed with an o-ring, so gently hand-tighten.
4. Repeat this process for both filters.
8.2 Routine Maintenance Schedule
Daily
1. Check for air and nitrogen leaks. Tighten or re-tape fittings as necessary.
2. Check that the inlet pressure is within recommended operating range.
Weekly
Clean unit as necessary.
Every Six Months
Replace filter elements.
ZHUHAI PRIMAN AUTO MAINTENANCE EQUIPMENT CO.,LTD
ADD:2# Plant, Minghong industry base Liangang industrial zone. Zhuhai City.
Guangdong Province P.R. China.
Tel:86-756-7799055
Fax:86-756-6210996
Email:zhpriman@zhpriman.com
Web:Http://www.zhpriman.com
9
Advertisement
