Advertisement
Model:PN-8830
1.0 Introduction
1.1 This Manual
Congratulations on selecting the nitrogen tire inflation equipment. Please read and
familiarize yourself with this manual before attempting to use this unit. Although this
unit is very simple to operate, the user will be working with high-pressure gas that
must be handled with caution. Compressed gas, if handled improperly, can result in
serious or fatal injury.
1.2 General Specifications *
Power Requirement
100-240Vac 50/60Hz
Operating Temperature
-20ºC/-4°F to 70ºC/158°F
Compressed Air Input Range
87-123psi/860-850kPa/6-8.5bar
Nitrogen Purity
95-99.99%
Nitrogen Output
70L/min (2.5cfm)
@
131psi/9bar/900kPa
Maximum Nitrogen Pressure in Tank
116psi/800kPa/8bar
Accuracy
+/-1 psi, 7 kPa, 0.07 bar
Units of Measurement
psi, kPa, bar
*Note: Specifications may vary for non-standard equipment. Contact your service
agent for further information.
1.3 Safety
General
The unit has standard process plant components and electrical equipment, which can
be hazardous to individuals unfamiliar with such equipment. It is the users'
responsibility to permit only trained and qualified process plant operators familiar
with the handling of compressed gases to operate this equipment.
Breathing
This unit is designed to produce high purity nitrogen from 95 – 99.99% purity.
Nitrogen is a colorless, odorless gas that will not support life. If released in an
unventilated area, it will displace the oxygen and can cause injury or death from
asphyxiation.
CAUTION: Nitrogen gas represents an extreme asphyxiation hazard when not
handled properly. Product gas should not be vented or otherwise discharged
except through the normal piping system. Appropriate signs should be placed in
the area of the nitrogen system warning of the hazards.
2
Advertisement
