Table of Contents
Advertisement
Available languages
Available languages
Using this unit
Key Side (key section color setting)
Phone (phone color setting)
You can select desired colors for the illuminated
You can select the desired key colors to display
sections on the left side on the front of this unit.
when an incoming call is received.
1 Press M.C. to display the setting mode.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
2 Turn M.C. to select the desired setting.
You can select any one of the options in the fol-
lowing list:
! Preset colors (ranging from White to
Rose)
! Scan (cycle through all colors)
! Sets of colors (Warm, Ambient, Calm)
! Custom (customized illumination color)
Display Side (display section color setting)
You can select desired colors for the illuminated
sections on the right side on the front of this unit.
1 Press M.C. to display the setting mode.
Notes
2 Turn M.C. to select the desired setting.
! The MIX/DISP OFF color cannot be changed.
You can select any one of the options in the fol-
! When Scan is selected, the system automati-
lowing list:
! Preset colors (ranging from White to
! When Warm is selected, the system auto-
Rose)
! Scan (cycle through all colors)
! When Ambient is selected, the system auto-
! Sets of colors (Warm, Ambient, Calm)
! Custom (customized illumination color)
! When Calm is selected, the system automati-
Key & Display (key and display color setting)
! When Custom is selected, the customized
You can select the desired colors for the keys and
display of this unit.
1 Press M.C. to display the setting mode.
Customizing the
2 Turn M.C. to select the desired setting.
You can select any one of the options in the fol-
illumination color
lowing list:
You can create custom illumination colors for
! Preset colors (ranging from White to
both Key Side and Display Side.
Rose)
! Scan (cycle through all colors)
1
! Sets of colors (Warm, Ambient, Calm)
2
press to select.
3
Display Side. Press to select.
4
illumination color setting appears in the dis-
play.
5
R (red) G (green) B (blue)
You can select any one of the options in the fol-
lowing list:
6
! Flashing The color selected from Key
Adjustment range: 0 to 60
# You cannot select a level below 20 for all three of
Side flashes.
! Flash FX 1 to Flash FX 6 The system auto-
R (red), G (green), and B (blue) at the same time.
# You can also perform the same operation on
matically cycles through all available key
colors for this unit. Select the desired
other colors.
mode.
Note
! OFF No change in key color made when
You cannot create a custom illumination color
incoming calls are received.
while Scan, Warm, Ambient or Calm is se-
lected.
About MIXTRAX
cally cycles through the preset colors.
MIXTRAX technology is used to insert a variety
of sound effects in between songs, allowing you
matically cycles through the warm colors.
to experience your music as a nonstop mix com-
plete with visual and lighting effects.
matically cycles through the ambient colors.
cally cycles through the calm colors.
! Depending on the file/song, sound effects
color saved is selected.
! MIXTRAX includes a MIXTRAX flashing color
MIXTRAX menu
Press M.C. to display the main menu.
Turn M.C. to display ILLUMINATION and
Turn M.C. to display Key Side or
1
Using this unit
Press M.C. and hold until the customizing
2
and press to select MIXTRAX.
3
Press M.C. to select the primary color.
tion.
Once selected, the following MIXTRAX functions
can be adjusted. The function is enabled when
Turn M.C. to adjust the brightness level.
MIXTRAX is on.
Notes
may not be available.
mode that when switched on turns the flash-
ing colors on and off in time with the audio
track. If you find the feature distracting while
driving, please turn MIXTRAX off. Refer to Op-
erations using the MIXTRAX button on page 9.
Press M.C. to display the main menu.
Section
02
Turn M.C. to change the menu option
Turn M.C. to select the MIXTRAX func-
SHORT PLAYBACK (short playback mode)
You can select the length of the playback time.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
1.0 MIN (1.0 minute) 1.5 MIN (1.5 minutes)
2.0 MIN (2.0 minutes) 2.5 MIN (2.5 minutes)
3.0 MIN (3.0 minutes) Random (random)
OFF (off)
! Turn this option OFF if you want to play a selec-
tion all the way through from start to finish.
FLASH AREA (flash area)
You can select areas for flashing colors.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
Key & Display (key and display) KEY SIDE
(key section) OFF (off)
! When KEY SIDE is selected, the illuminated
sections on the left side on the front of this
unit flash.
! When OFF is selected, the color set under IL-
LUMINATION is used as the display color.
Flashing Color (flash pattern)
17
En
Advertisement
Table of Contents
