Table of Contents
Advertisement
3
Installing your appliance
3.2 Mounting the hood body
• Before attaching the hood body, tighten the two
screws Vr located on the hood body mounting
points.
• Hook the hood body onto the support screws.
• Fully tighten the support screws.
• Adjust screws Vr to level the hood body.
3.3 Connection
3.3.1 Ducted mode air exhaust
system
• When installing the ducted mode, connect the
hood to the chimney using either a flexible or
rigid pipe with ø 150 mm.
• Fix the pipe in position using sufficient pipe
clamps (not supplied).
• Remove any activated charcoal filters.
10 / 15 EN
3.3.2 Recirculation mode air
outlet
• Insert the connection extension pieces laterally
in air outlet connection.
• Make sure that the outlet of the extension
pieces is horizontally and vertically aligned with
the chimney outlets.
• Ensure that the activated charcoal filters have
been inserted.
Cooker Hood / User Manual
Advertisement
Table of Contents
