Pat Testing; Disposal And Recycling - NJD Electronics NJ179 Manual

Led par spot
Table of Contents

Advertisement

etc. until
200—209
210
211
212
etc. until
253
254
255
To set the DMX START ADDRESS press SETUP repeatedly until
appears in the first character of the display. Then use the UP and
DOWN buttons to select the address required. The DMX START
ADDRESS is the DMX address of the first DMX control channel.
The 2nd DMX channel is at the DMX start address + 1, the 3rd
DMX channel is at the DMX start address +2, etc.
Clean the outside of the luminaire with a soft damp cloth, with a
drop of washing-up liquid.
Clean the lenses with glass cleaner.
When used in a workplace, this product must be safety-tested yearly
by a qualified electrician (PAT Tested) in order to comply with the
Electricity at Work Regulations.
If hired out, it must be PAT tested prior to each hire.
We recommend that it is PAT tested regularly when used in a
domestic environment.

DISPOSAL AND RECYCLING

You must not dispose of this appliance with domestic household
waste.
Most local authorities have specific collection system for appliances
and disposal is free of charge to the end-user.
When replacing an existing appliance with a similar new appliance
your retailer may take the old appliance for disposal.
ID20
ID21
ID22
ID23
ID64
ID65
ID66
CLEANING

PAT TESTING

Page 7
d

Advertisement

Table of Contents
loading

Table of Contents