Table of Contents
Advertisement
Installer and Users please note:
These instructions should be read carefully and left with the user of
the product for future reference.
You must inspect the product including its cable and plug for any
signs of damage. If the product is damaged, DO NOT use it, and
contact your supplier immediately.
A risk assessment should be carried out before commencing work.
Fix the luminaire with the hanging bracket provided. To conform with
Health & Safety legislation, a safety chain will also be required.
Attach the safety chain to the "Safety Eye" on the rear panel.
Alternatively, the luminaire may be floor-mounted by using the two-
part bracket as stand.
If permanently installed, the luminaire must be installed by a
competent electrician in accordance with the latest IEE Wiring
Regulations.
Either plug the lead into a 13 A socket, or remove the 13 A plug
fitted, and wire directly to a fused spur, or connect the luminaire to
a switching unit such as the NJ938.
The wires are colour-coded as follows:
• Brown = Live (phase)
• Blue = Neutral
• Green/Yellow = Earth
• The NJ179 must be earthed for safe and reliable operation
This luminaire is for professional use only. It is the owner's
•
responsibility to ensure that all users are given adequate supervision
and instruction concerning the use of the appliance in a safe way
and understand the hazards involved.
Children should be supervised to ensure that they do not play with
•
the luminaire.
Do not stare into the beam.
•
Do not place on carpet or other soft surfaces.
•
IMPORTANT
BEFORE USE
INSTALLATION
PRODUCT SAFETY
Page 2
Advertisement
Table of Contents
