Troubleshooting / Repairs - Everwin SN40 Series Operation And Maintenance Manual

Worn driver causing poor driving quality or loss of power:
Wear or a chip on the driver tip will affect the fastener drive, giving symptoms of bent and incompletely driven
fasteners, and damaged fastener heads.
When there is a need, please contact a qualified service technician for this replacement.
The troubleshooting and / or repairs shall be carried out only by the authorized dealer / distributor or by other
pneumatic tool specialists.
QUICK JAM-RELEASING MAGAZINE
The stapler contains a "Quick Jam-Releasing Magazine" feature. The magazine is spring loaded to reduce
jamming. When a jam does occur, a quick release mechanism at the rear of the magazine allows the magazine
to move back, in order to clear the jam.
ALWAYS DISCONNECT AIR SUPPLY BEFORE CLEARING A JAMMED FASTENER.
(FIG. 4). This will pull the magazine back to clear the jam. After removing the jammed fastener, push on the latch,
rotate it 1/4 turn counterclockwise and push up to close.
SPEED ADJUSTMENT VALVE
DRIVER MAINTENANCE INSTRUCTIONS

TROUBLESHOOTING / REPAIRS

If a jam does occur, locate the latch at the rear of magazine (FIG. 1). Pull down on the
latch to open (FIG. 2), and rotate it clockwise 1/4 turn (FIG. 3). Pull back on the latch
FOR MAXIMUM SPEED:
Rotate valve clockwise as far as possible.
TO REDUCE SPEED:
Rotate valve counterclockwise.
15