Table of Contents
Advertisement
EVGA Z270 Classified – K (134-KS-E279)
EPS 8-pin 12V Power (PWR
)
8P
, the 8-pin ATX 12V power connection(s), is used to provide
EPS PWR 8P
power to the CPU. Align the pins to the connector and press firmly until
seated. The secondary EPS, if present, is optional for improved overclocking.
Please remember to make sure that the tab on the EPS socket is aligned with
the release clip on the cable. NOTE: If the tab and release clip are on opposite
sides, yet the power connector fits, then you are using a PCI-E 8-pin cable,
which WILL damage the board if powered on. Please review installation
instructions from your power supply manufacturer to verify which connectors
may be used for the CPU power.
- 43 -
Advertisement
Table of Contents
