Table of Contents
Advertisement
EVGA Z270 Classified – K (134-KS-E279)
The non-CPU Vcore voltages do not utilize the Adaptive or Override voltage settings.
Instead, these use a pulldown menu to select preset voltages, as shown in the image
below. The voltages for these components are set by detection during POST, and E-
LEET will open the pulldown to the currently detected voltage. Please be careful when
adjusting voltages, as there are risks to running electronics out of spec. Although
EVGA warranties overclocking, other components are manufactured by different
brands (i.e. RAM and CPU), which may have different policies towards overclocking.
When your changes are complete, click "Apply Selection" at the bottom, or return to
defaults by clicking the "Restore" button.
Below is the voltage range list within E-LEET:
ELEET Voltage
Minimum
Values
Voltage
VCore Target Voltage:
VCore Offset Voltage:
-0.500
DIMM Voltage:
PCH 1.0V:
PCH 1.8V:
VCCIO:
VSA:
This is the E-LEET utility in its entirety; this should provide enough of an overview to
utilize the E-LEET software suite.
Maximum
Default
Voltage
Voltage
2.000
1.200
0.800
0.500
0.000
2.000
1.225
1.200
1.597
1.000
1.000
2.497
1.800
1.800
1.796
0.975
0.950
0.700
2.0000
1.050
- 135 -
Advertisement
Table of Contents
