EVGA Z270 Classified-K User Manual page 132

EVGA Z270 Classified – K (134-KS-E279)
The next tab is "Monitoring," which is an
overview of temperatures and voltages in real-
time. Please note that all readings on this
page are pulled from motherboard sensors,
and can change at any time. Temperatures
and voltages are measured at fixed intervals,
which can often make the readings appear to
jump back and forth. Furthermore, voltages
on modern motherboards are sometimes
directly adaptive based on load; voltage
readings *WILL* change based on usage,
which is normal. Although E-LEET does
offer functionality that will directly affect
temperature and voltage readings, that
functionality does not exist on this page. To
adjust voltages within E-LEET, please see Page 134 for the Voltage tab information.
Below Voltages is Temperatures. This covers the CPU (socket), PWM, SYS, individual
CPU cores, and the CPU package, which reports temperatures from the CPU Register.
The bottom section is for Fans, which displays the RPM of all fans currently plugged in
to the motherboard using the 3-pin or 4-pin fan header.
The next tab is "Overclocking," which covers
adjustments to the BCLK, individual Cores,
and the RING.
The BCLK can be adjusted by either
manually moving the slider, or clicking on the
arrows to the right. The BCLK can be
adjusted by hundredths of a MHz. For
example, the slider will show 10511, whereas
the monitor will show 105.1 (rounded).
The Cores and the RING are adjusted in the
same fashion, except they are adjusted by
whole numbers, rather than fractions.
At the bottom is a checkbox for "Turbo
Mode," which is required to adjust clock
multipliers. The Restore and Apply Settings
buttons are there to either revert to factory
default, or make your changed settings live.
- 132 -