Advertisement
WARNING
Keep all combustible materials away from this heater.
Minimum Clearance From Combustibles
Sides
Top
36 in.
60 in.
ALWAYS install the heater so that it is not directly
exposed to water spray, rain, dripping water, or wind.
ALWAYS provide adequate clearance for
accessibility, combustion and ventilation (air supply)
while heater is operating.
WARNING
– Use heater in accordance with all local codes.
In the absence of local codes, refer to The
National Fuel Code, ANSI Z223.1.
–
convert to any other gas. Installation must
conform to local codes, or in their absence,
with the standard for the Storage and
Handling of Liquefied Petroleum Gases ANSI/
NFPA 58 and the Natural Gas and Propane
WARNING
© 2013, Pinnacle Products International, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
WHILE CONNECTED TO A FUEL SOURCE
Front
Rear
60 in.
36 in.
Do not
The hose assembly shall be
WARNING
– Gas supply connections should be checked
by using a 50/50 soap and water solution.
– Do not direct heater discharge towards the LP
cylinder unless it is at least 20 feet from the
heater.
– Use only the regulator and hose assembly
provided with this heater. Inspect the
regulator/hose assembly prior to each use of
the heater. If there is excessive abrasion or
wear, or if the hose is cut, replace it with the
proper assembly shown in the parts list, prior
to using the heater.
Minimum and Maximum Inlet Pressure
16-TTC
Min.
Max.
Propane Tank Top Heater User's Manual
3
.
32-TTC
5 PSI
Bottle Pressure
Advertisement
