Jack JK-T1377E Instruction Manual page 17

3.1 The technician parameter table
1.Long press , can modify the technician parameter table;
2.Press the corresponding key
parameter number and change the corresponding parameter values;
3.Finally to press the key , exit parameters setting mode, back to the
sewing pattern.
The serial
range
number
100 100
101 200
~
104 200
108 100
13A 0 800
~
13E 0 800
~
140 0
149 0
~
164 -
165 XXXX
Note: 16 x parameter operation is to be a long time holding down the key
about 3 to 5 seconds.
Typical Parameters to describe
values
800 200 The sewing speed
~
The maximum speed limit on free
1500 1500
seam top speed (global)
800 400 Reset speed
~
800 400 Sewing speed slow
~
300 Pedal presser foot set the time
Presser foot lift the delay time
10
Electricity automatically find a
2 1 parking space: 0: don't look for;
~
1: find a ；2：automatically find Used to
Presser foot slowly let go off (0
10 0 closed slowly, non-zero for slow
opening)
password
7001 Restore the factory Settings
and or and
- 17 -
keys can choose
note
speed
Pedal
speed
paramet
er
set