Getting Started - Shark NV105 Owner's Manual

Getting Started

E
A
G
B
C
FIRST THING'S FIRST, YOU
NEED TO KNOW WHAT'S IN THE
BOX YOU JUST OPENED:
A E
Handle Hose Connector
B Extension Wand F Vacuum Body
C
Stretch Hose G Accessory Holder
D Dust Cup H
Power Nozzle
Optional tools are available
for sale. To order additional
parts or accessories go to
www.sharkclean.com.
4 TOLL FREE: 1-800-798-7398
Assembly
Hose Connector
Fig. 1
D
F
H
Fig. 2
YOUR SHARK ® NAVIGATOR ™
IS EASY TO ASSEMBLE:
1
Place your vacuum body upright
on a level surface.
2 Insert the hose connector into
the opening on the back of the
vacuum body. (Fig. 1)
NOTE: Once the hose connector
has been inserted, it cannot be
removed.
3 Insert the handle with the
extension wand into the top of
the vacuum until secure.
(Fig. 2)
Not all accessories are available
on all models.
b
Fig. 3
Fig. 5
Fig. 4
6
4 Insert the stretch hose into the When storing your vacuum,
hose connector on the back of wind the power cord around
the unit. Make sure that it snaps the two cord holders and secure
in place. (Fig. 3) with cord clip. (Fig. 6)
5 7
Store your on-board tools onto There is a Quick Cord Release
the accessory holder located on the top cord holder. Simply
on the back of the unit. (Fig. 4) turn to the left or right to
NOTE: The accessory holder is release the power cord. To store
removable. In order to remove the unit, the cord holder should
or attach the accessory holder, be in the upright position.
you must remove the dust cup
IMPORTANT: For suction to
first. To remove the accessory
reach the power nozzle, the
holder, just hold the tab (a),
extension wand and stretch
rotate left and pull out. To
hose must be attached securely
replace, align the pins into
on the vacuum body.
the hinges (b) on the vacuum.
Rotate it fully to secure. (Fig. 5)
a
Fig. 6
8
TO CARRY THE VACUUM:
With the unit in the standing
position, lift by the Dust Cup
Handle (carry handle).
CAUTION: When lifting or
carrying, DO NOT press Dust
Cup release button ( ).
www.sharkclean.com
English
5