Page 2
If you require any further information, please do not hesitate to call us on 0861 466324. Any complaints regarding goods or services supplied by homechoice should be made to our Customer Care Department. Post: homechoice, Freepost CB0225, Capemail 8089 E-mail: contact@homechoice.co.za...
Sandhurst fireplace heater HCFP-07G keep this instruction manual in a safe place for future reference Thank you for purchasing the Sandhurst fireplace heater. Please read through this manual before connecting and operating this product. Retain this manual for future reference. Product checklist Sandhurst fireplace heater ...
22 This appliance has been designed for use in households and similar environments, including (but not limited to) areas such as staff kitchens in shops and offices, hotel and B&B rooms, farmhouses, etc. Note: This product is not intended for use in industrial settings. 133728R Sandhurst Fireplace Heater.indd 4 2014/12/05 3:46 PM...
Page 5
Increase or decrease the flame effect by rotating the flame adjustment switch (1). Turn the Temperature control knob (6) clockwise or anti-clockwise to achieve the desired room temperature. Close the control panel cover after selecting the desired settings on the appliance. ■ 133728R Sandhurst Fireplace Heater.indd 5 2014/12/05 3:46 PM...
Figure 2 Placement The Sandhurst fireplace heater must be used on a stable, level surface. When positioning the heater, the following precautions must be taken into account: If the heater is to be placed in an...
Light, but no heat: Ensure the Temperature control knob is set above the current room temperature. Alternatively, the automatic cut-off switch may have been activated. Check the Operating instructions in this manual. 133728R Sandhurst Fireplace Heater.indd 7 2014/12/05 3:46 PM...
Page 8
Customer Care Department: Mondays to Fridays: 8am – 7pm Saturdays: 8am – 1pm To place any new orders: call 0861 466324 see more online outside SA call +27 21 680 1300 @ homechoice.co.za 133728R Sandhurst Fireplace Heater.indd 8 2014/12/05 3:46 PM...