Table of Contents
Advertisement
Main Menu Buttons -
Settings
Thermostat Name
Use keypad to name
your thermostat. The
name is displayed on
the Home Screen.
(Up to 14 characters)
Name appears here
Available Modes
Choose the desired modes the thermostat will use: Heat, Cool, Heat & Cool,
or Auto (All). For example, if you only have a heater, choose Heat, and only
Heat & Off modes will be available. This will simplify the operation for the user.
SD Card
Import and export files to and from the thermostat. See the
ColorTouch Assistant instructions for further details.
Import Settings from SD Card
Upload files from ColorTouch Assistant or
another thermostat.
Export Settings to SD Card
Export files from one thermostat and import them into others.
General Setup
Units
Fahrenheit (F)
Celsius (C)
Settings
Thermostat heating and
cooling options are found
in this menu
(F)
42
(all)
*NOTE: A 2GB SD card is
recommended. To import and
export files, the SD card must
contain the same version of the
firmware as the thermostat.
ColorTouch Assistant will
keep the firmware current.
Advertisement
Table of Contents
