Page 2
Revision History Revision Date Reason for change Revision Modifier V1.0 2021-6-24 Initial release V1.1 Z603L/LE Reference Manual V1.0...
Page 3
Therefore, it is recommended to observe anti-static safety precautions when handling any circuit board component (including Z603L/LE). Anti-static safety protection measures include, but are not limited to the following: a) The smart box should be placed in an anti-static bag during transportation and storage, and then the board should not be taken out during installation and deployment.
Page 4
2. Scope of technical discussion Due to the wide range of embedded system knowledge and various types of involvement, we can not guarantee that all kinds of questions can be answered one by one. The following content is not Z603L/LE Reference Manual V1.0...
Page 5
Updates of subsequent documents, BSP, driver files and other official account will be updated in time. We will pay close attention to our developments in order to ensure that your information is up to date. We will push through WeChat public. Z603L/LE Reference Manual V1.0...
1 Product introduction Z603L/LE is a new Feiyun Smart Box™ based on the NVIDIA Jetson™ Xavier NX series module design. It has a built-in Xavier_NX module integrated with a 384-core Volta™ architecture GPU, pre-installed with the Ubuntu 18.04 operating system, and has 21TFLOPS of AI processing capabilities for floating-point operations.
M, 1 x M.2 KEY E, SSD optional, WIFI and Bluetooth available Optional; 2 WIFI/Bluetooth antenna ports, power indicator light, -20——+60℃; including power adapter, providing RTS-Linux4Tegra software support package for the new era of Ruitai Order online: https://shop340963258.taobao.com https://mall.jd.com/index-824786.html Z603L/LE Reference Manual V1.0...
Realtimes Beijing Technology Co.,LTD www.realtimesai.com 2 External interface function and location Z603L/LE FRONT Z603L/LE BACK Z603L/LE Reference Manual V1.0...
The steps to enter the Recovery mode are as follows: Turn off the power supply to the system. Use a USB cable to connect the OTG-USB port of the Z603L/LE and the USB port of the Jetson development host. Press the RECOVERY button without releasing it to supply power to the system, keep the power supply for more than 3 seconds, then release the RECOVERY button.
Page 11
Realtimes Beijing Technology Co.,LTD www.realtimesai.com The system enters Recovery mode, and subsequent operations can be performed at this time.。 Z603L/LE Reference Manual V1.0...
Pin2: the place marked by the box on the right 4.5 Network port Function Gigabit Ethernet connector Marking GbE5 RJ45 Type Pin define Signal Signal TP0+ TP0- TP1+ TP2+ TP2- TP1- TP3+ TP3- Z603L/LE Reference Manual V1.0...
4.7 USB3.0 Interface Function USB3.0 Connector Marking USB Type-A interface Type Pin define Signal Signal VBUS SSRX- SSRX+ SSTX- SSTX+ 4.8 USB2.0 OTG Function Micro USB Connector Marking interface Type USB 2.0 MicroType-B Pin define Signal Signal VBUS Z603L/LE Reference Manual V1.0...
Pin1: The place marked by the blue box on the right. Pin2: The place marked by the box on the right. Hardware update history Z603L/LE Board card hardware update history Revision Reason for change V1.0 Initial release V1.1 Change board 6 Product size diagram Z603L/LE Reference Manual V1.0...
7 Drive When Z603L/LE is working on a system burned with the official original version of NVIDIA Linux For Tegra (L4T). HDMI, Gigabit Ethernet, USB2.0, serial port, GPIO, I2C bus, fan interface, and upper USB3.0 are all supported. But with SD card, the USB3.0 below does not work properly.
Technology will bear the ship cost of the products after maintenance. The following conditions are not covered by the warranty terms a) Improper installation, improper use, misuse and abuse of products(Overloading, for example). b) Improper maintenance and storage(Such as fire, explosion, etc)or natural disasters(such as lightning Z603L/LE Reference Manual V1.0...
Need help?
Do you have a question about the Z603L/LE and is the answer not in the manual?
Questions and answers