NSK Surgic Pro2 Quick Operation Manual

Surgic Pro2 Quick Operation Guide
Control panel
CALIBRATION Key
SETTING Key
ENTER Key
CANCEL Key
LINK Key
COOLANT Key
Foot control
Change program
Change coolant
solution flow
Preparation for Use
Connect the AC Remove the battery cover
power cord. from the foot control.
Insert the irrigation Turn the pump cover
tube. counterclockwise 180°.
To
"Starting
operation"
Attach the tube
holders.
Starting operation
Turn on the power of The above is displayed.
Surgic Pro2 and each
paired device.
700 Shimohinata, Kanuma, Tochigi 322-8666, Japan
F G
FWD/REV Key
H I J
LIGHT Key
Change motor
direction
Speed control
pedal
Insert three AAA Attach the battery cover.
batteries.
Insert the irrigation tube into a pack.
The normal screen is displayed.
Make sure that each device is connected.
M A
K L E D
A Rotation speed
B Torque
C Program No.
D Gear ratio
E Implant system No.
F Rotation direction
G Coolant solution flow level
H Light level
Install the foot
control hanger.
Connect the motor
cord.
B
C
GEAR Key MEMORY Key
I Battery level of the foot control
Status of connection between
J
the foot control
Status of connection between
K an external terminal and the
control unit
Status of connection between
L
VarioSurg 3 and Osseo 100+
M Current operating torque level
Mount the coolant Turn the pump cover
solution hanger post. clockwise 180°.
Connect the handpiece.
Ready for
operation
For details, see the operation manual.
OM-DE0939EN 000
SPEED Key
TORQUE Key
PROGRAM Key
Attach the
irrigation nozzle.