Electro-Voice ZX Series ZX3 Owner's Manual page 9

Suspending Zx3 Speaker Systems (cont')
Using the ZX3 in an Array
The Zx3 can be used in arrays of up to 6 loudspeakers by using the CB5 Array Bracket. The bracket can
be used for both 60° or 90° splay angles. Please consult the CB5 user instructions for more information.
Figure 10a:
Arraying Two Zx3's Using the Optional Array
Bracket Kit
Kits Used -
SSK-1 Single-Stud Rigging Kit (x1)
Figure 10c:
Arraying Two Zx3's Two Enclosures High Using
the Optional Array Bracket Kit
Kits Used -
SSK-1 Single-Stud Rigging Kit (x1)
EBK-3 Forged M8 Eyebolt Kit (x1)
Electro-Voice® Zx3 Owner's Manual
CB5 Array Bracket Kit (x1)
NOTE: Do not
ing load limit for
individual rigging
points when ar-
raying the Zx3.
CB5 Array Bracket Kit (x2)
Arraying Three Zx3's Using the Optional Array
Kits Used -
exceed work-
See Figure 2,
Page 4
Arraying Three Zx3's Two Enclosures High
Using the Optional Array Bracket Kit
Kits Used -
Figure 10b:
Bracket Kit
CB5 Array Bracket Kit (x2)
Figure 10d:
CB5 Array Bracket Kit (x2)
EBK-3 Forged M8 Eyebolt Kit (x1)
8