Advertisement
Quick Links
Oska Buffet
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
D
screw
bolt
dowel
locking
x22
x9
x12
nut x12
L
K
M
cover
plastic
nut
bracket
x
4
x2
glide x4
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
F
G
E
screw
hinge
adjuster
x6
x4
x1
Q
O
N
P
seal
bolt
Allen
x4
key x1
x2
x2
Hardware Supplied
Phillips & Flathead screwdrivers
and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
J
H
I
screw
wedge
screw
x8
x8
x24
S
T
R
Sticker
plug
big
dowel
x8
x5
x4
V
W
X
safety
screw
wall
x1
strap x1
anchor
x1
Wall Strap
Y
Z
wall
washer
screw
x2
x1
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Mocka Oska Buffet
Summary of Contents for Mocka Oska Buffet
- Page 1 Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 Tighten with a screwdriver. Place 1x cover (N) over the bracket (M) as shown. Flip the panel [5], insert 2x bolts (C) into panel [6] and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 Place 1x cover (N) over the bracket (M) as shown. Flip the locking nuts (D). Tighten with a screwdriver. panel [6], insert 2x bolts (C) into panel [6] and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 Slide panel [8] down along the grooves between panels [5], [6] and [7] to form the back of the unit as shown 4x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 Attach panel [3] and [4] to panel [1] with 4x dowels (A) and secure with 4x locking nuts (D). Tighten with a screwdriver. [1], [3], [4], [5] and [6] to form the back of the unit as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 4x plastic glides (K) to panels [10] with a hammer. dowels (A) and secure with 1x screw (B). Tighten with a screwdriver. Screw the adjuster (G) to the panel [11]. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 7 2x seals (O) to panels [13] and [14], secure with 2x and rest the shelf panels [12] onto them. Ensure the shelves are balanced and stable. screw (E). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 8 (V) to the top of the back side of the unit as shown by twisting it outwards. using 1x washer (Z) and 1x screw (W). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 9 (V). Fasten to the wall using 1x washer (Z), 1x wall anchor (X) and 1x screw (Y). Ensure unit is balanced and steady before use. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Oska Buffet and is the answer not in the manual?
Questions and answers