Installing Your Oven Accessories - Westinghouse WVE607 User Manual

INSTALLING YOUR OVEN ACCESSORIES

Catalytic liners (on selected models)
TIPS & INFORMATION IMPORTANT
Models which contain catalytic liners have 2 catalytic
side liners (to be fitted by you) and a catalytic fan cover
(already fitted).
NOTE: If your model does not have catalytic liners, they
are available for purchase from the Customer Care Centre.
Catalytic liners are coated with a specially formulated
enamel coating. This porous coating enables a "self
cleaning" process. Catalytic liners must be installed first
but you can omit them, if you wish, with no effect to
cooking performance. Their sole purpose is to make oven
cleaning easier.
• The catalytic liners attach to each side of your oven.
There is a left hand and right hand version which is
marked on the panel.
• Position the first liner as per the diagram. The black,
shiny side of the liner should be facing the oven
wall, the hooks pointing down and the word 'LH'
positioned to the top rear portion of the oven. The
right hand side will be a mirror image of this.
• Line the hooks up with the slots provided in the oven
wall, push them in and then allow the liner to slide
down to its final position.
• The access hole for the side racks should be visible
when the liner is correctly positioned.
8
INSTALLING OVEN ACCESSORIES
Side racks
The side racks that come with your oven can be attached
to either side of your oven.
• Insert the twin pegged side into the rear access holes
provided, ensuring that the pegs are fully inserted.
• Then locate the front peg into the front access hole
and push in firmly.
• (WVE626 and WVE665 only) when locating the left
side rack into the small oven or grill, ensure the pegs
are inserted into the upper two access holes.
rear
front
Shelves and trays
IMPORTANT TIPS & INFORMATION
The shelves are designed so that they have maximum
travel but cannot be accidentally pulled right out. The
trays are designed the same way and fit straight into the
side racks.
To fit a shelf or tray to side racks:
• Locate the rear edge of the shelf/tray in between
2 guide rails of the side rack - see diagram. Ensure
the same rail positions on both sides of the oven are
being engaged.
• With the front edge raised, begin to slide the shelf
into the oven.
• Once the detents have passed the front edge of the
side rack, the shelf can be pushed completely in.
• The grill/baking tray for separate grill wall oven
models slides into the wire runners in a similar
manner.
• When fully inserted the shelf/tray should not interfere
with the closed oven door.
• Remove extra trays and dishes before roasting
or baking.
To fit a shelf or tray to telescopic slides (where fitted):
• With the slides fully pushed in, push the shelf or tray
along the top of the slide until it hits the back post.
• Drop the front of the shelf or tray onto the slide
ensuring it sits behind the front post of the slide.
• When fully inserted the shelf/tray should not interfere
with the closed oven door.
INSTALLING OVEN ACCESSORIES
9