Page 1
Assembly Instructions and the current regulations for industrial safety and accident prevention. Always keep this translation of the “Original Assembly Instructions“ at the device! The manual has to be available anytime! Walther Systemtechnik GmbH – D 76726 Germersheim Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91 http://www.walther-2000.de – info@walther-2000.de...
APPENDIX ................................ 15 10.1 – D WDVHP-02-HG .............. 15 IMENSIONED AND PARE RAWING OSING ALVE 10.1.1 Spare Part List – Dosing Valve WDVHP-02-HG ..................16 10.2 – D WDVHP-03/04-HG ............17 IMENSIONED AND PARE RAWING OSING ALVE 10.2.1 Spare Part List – Dosing Valve WDVHP-03-HG ..................18 10.2.2...
/ electronic residual energies. 2.3 Warranty and Liability According to the conditions laid down by the German Engineering Federation (VDMA), Walther Systemtech- nik GmbH has a guarantee of 12 months under normal European operating conditions on its own parts (spare parts are excluded);...
The type of packaging depends on the individual mode of shipping. If not separately contracted, the packaging is in accordance with the rules and regulations of Walther Systemtechnik GmbH. This rule is in accordance with the Federal Association for Packaging HPE.
The special construction allows choosing between bottom or grip of the device for the connection of grease and air. If not used, the connections will be sealed by screws Control air Material Walther Systemtechnik GmbH – D 76726 Germersheim Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91 http://www.walther-2000.de – info@walther-2000.de...
Ambient temperature min. [C°] Ambient temperature max. [C°] Connection Cable with plug-in connection Protection type according to DIN 40050 IP 67 Material of housing PA 12 Walther Systemtechnik GmbH – D 76726 Germersheim Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91 http://www.walther-2000.de – info@walther-2000.de...
5) Keep the distance short between the dosing valve and the greasing point. This allows for improved metering precision and repeatability. 6) The cycle time depends on the viscosity of the lubricant, as well as on the lubricant feed pressure. Walther Systemtechnik GmbH – D 76726 Germersheim Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91 http://www.walther-2000.de – info@walther-2000.de...
Danger from flammable sprayable medium with adverse health effects. Please observe the security advice on the material containers and also the safety data sheet. 6.3 Operating Elements Adjusting screw Locking screw Trigger / Release Walther Systemtechnik GmbH – D 76726 Germersheim Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91 http://www.walther-2000.de – info@walther-2000.de...
Page 14 of 19 9 Troubleshooting 9.1 General Information IMPORTANT First check all supply lines for proper connection and serviceability. In case of serious problems that cannot be resolved, please contact the Walther Systemtechnik GmbH customer service. 9.2 Malfunctions Problem Possible cause...