Jabiru J-160 Construction Manual

Hide thumbs Also See for J-160:

Pre-Paint>Fuselage>Empennage>Fit horizontal stabiliser

Issue Revision Table

Issue

Date:

Change(s):

16/11/2021

Adopt "Section Only" Manual System, Add Issue Revision Table and

model applicability.

Horizontal stabiliser incidence angle 1.5 degrees (was 3)

Model Applicability

Aircraft Model

Document Applicability

This document is controlled while it remains on the Jabiru server. Once this no longer applies it becomes uncontrolled.

Issue:

Pre-Paint>Fuselage>Empennage>Fit horizontal stabiliser

J-160

J-170

Yes

Jabiru Construction Manual

J-230

Yes

Issued by: AS

Page: 1 of 6 16 November 2021

Issued by:

J-430

Yes

Table of Contents

Need help?

Do you have a question about the J-160 and is the answer not in the manual?

Page 1 Model Applicability Aircraft Model J-160 J-170 J-230 J-430 Document Applicability This document is controlled while it remains on the Jabiru server. Once this no longer applies it becomes uncontrolled. Issue: Issued by: AS Page: 1 of 6 16 November 2021...
Page 2 This will be your main reference for aligning the horizontal stabiliser. This document is controlled while it remains on the Jabiru server. Once this no longer applies it becomes uncontrolled. Issue:...
Page 3 – the pencil line on the stabiliser will act as a guide for where to sand and where to coat with resin. This document is controlled while it remains on the Jabiru server. Once this no longer applies it becomes uncontrolled. Issue:...
Page 4 This document is controlled while it remains on the Jabiru server. Once this no longer applies it becomes uncontrolled. Issue: Issued by: AS Page: 4 of 6 16 November 2021...
Page 5 Stabiliser P/N 2A109A0D, 2A109F0N (for J230 kits) or 2A023D0D (for J170 kits), if your P/N is 2A069A0D then continue. This document is controlled while it remains on the Jabiru server. Once this no longer applies it becomes uncontrolled. Issue: Issued by: AS...
Page 6 This completes the Pre-Paint>Fuselage>Empennage>Fit horizontal stabiliser task. This document is controlled while it remains on the Jabiru server. Once this no longer applies it becomes uncontrolled. Issue: Issued by: AS...

J-170 J-230 J-430